1,28 £
Tax excl. - 1,28 £ Tax incl.
En stock:
18
- Il n'y a plus d'articles dans votre panier
- Livraison
- Total 0,00 £
- Interrupteurs
- Connectique
- Embase Secteur IEC
- Fiche Secteur à Visser
- Barrette de Connexion
- Prise de Courant Euro Module
- Prise Electrique UK
- Prise et Fiche Allume-Cigares
- Prise DC
- Adaptateurs Secteur de Voyage
- USB
- Cordon Secteur
- Cosses Electrique à Sertir
- Waterproof Plugs, Sockets and Connectors
- Solar PV Connectors
- EV Cables
- Circular 12mm Connectors
- Circular 16mm Connectors
- Circular 20mm Power Connectors
- Binding Posts
- Circular Connectors - Range Overview
- GST Connectors
- Circular RJ45 Connectors - Waterproof
- USB Data Connectors - Waterproof
- Protection Thermique
- Fusibles, Porte-Fusible
- Potentiomètre
- Filtre
- Piles
- Eclairage
- Douilles Luminaire
- Douilles CFL
- Douilles Céramique
- Douilles Fluorescent
- Douilles à vis Edison
- Douilles à vis Edison E14
- Douilles à vis Edison E27
- Douilles à vis Edison E27 Laiton
- Douilles à vis Edison E27 Brillant
- Douilles G10Q
- Douille Basse Tension GX5.3, GY6.35, GU4 et GU5.3
- Accessoires pour Douille Luminaire
- Douilles GU10
- Douilles Baïonnette B22 (BC)
- Douilles à vis Edison E27 avec Terre
- Douilles R7s
- Douilles G9
- Voyant
- Ampoules
- Câbles Textile
- E27 Kit Suspension
- Ceiling Rose
- Interrupteur pour Luminaire
- Dimmer Switches
- Low Voltage Lighting
- Douilles Luminaire
- Piezo Buzzers
- Automotive & Marine
- 12 Volt and 24 Volt Rocker Switches
- Marine and Automotive Rocker Switches
- Bilge Plumps & Submersible Pumps
- 12 Volt and 24 Volt USB Power Supply
- Boîtes à Fusibles
- Cigar Lighter Plugs, Sockets (In Car Power)
- Voltmeters
- Automotive Relays
- Voltage Sensitive Relays
- Interrupteurs de Sécurité du Véhicule
- Busbars
- Éclairage
Référence: 0707-1-CW1
Marque: Inalways
Connecteur Embase Secteur IEC C14
IEC Connecteur Embase Secteur / Mâle / EN60320 C14 / Tension 10A 250Vac / Embase de Panneau à Visser / Cosses Plates 6,3mm / UL, VDE / RoHS / 0707-1-CW1.
0,75 £
Tax excl. - 0,75 £ Tax incl.
En stock:
2441
Référence: R13-112A
Marque: SCI
Interrupteur à Bascule Rond R13-112A
Interrupteur à Bascule Rond / Unipolaire / SPST / On-Off / Noir / Motif d'Impression O - / 10A Résistive 250Vac / 20mm / Cosses Plates 4.8mm / VDE, UL / RoHS / R13-112A.
0,78 £
Tax excl. - 0,78 £ Tax incl.
En stock:
2556
Référence: R0904N-B10K1
Marque: Song-Huei
9mm 10K Ohm Linear Pot with White Line Indicator
Rotary Potentiometer with White Line Indicator / 9mm / Round Plastic Shaft 25mm Long & 6mm Diameter / Single Unit / Un-Switched / Vertical Terminal Orientation / No Bushing / PCB Terminals / 20% Tolerance / 10K Resistance / Linear Taper / RoHS / R0904N-B10K L-25KQ.
0,85 £
Tax excl. - 0,85 £ Tax incl.
En stock:
1997
Référence: K327E
Marque: Kang Rong
Douille Céramique E27
Douille Céramique (Porcelaine) / E27 (ES) / Blanche Mate / 4A 250Vac 2KV / T180 / Pour Ampoule 27mm (E27) / VDE, RoHS / K327E.
0,97 £
Tax excl. - 0,97 £ Tax incl.
En stock:
339
Interrupteur pour Luminaire Unipolaire - Blanc
Note
A single pole 2 Amp inline switch in white with termination for live, neutral and earth cables. The body screws together with two screws for simple fast assembly. Suitable for 2 core and 3 core cables. Internally assembly is achieved using screw terminal blocks.
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Description
Single pole inline switch in white suitable for new lighting designs or refurbishment of table lamps. Can be used with either 2 core or 3 core cables. Made in Italy by Arditi and carrying ENEC and CE approvals. The switch should be installed on the live wire.
Dimensions - 60mm (L) x 15mm (H) x 26mm (W)
Avis
Aucun avis n'a été publié pour le moment.
16 autres produits dans la même catégorie :
Référence: K540K
Marque: Rui Jun
20.8mm Lamp Holder Ring
Lamp Holder Shade Ring / 28mm Diameter / Internal Diameter 20.8mm / White / K540K.
0,24 £
Tax excl. - 0,24 £ Tax incl.
En stock:
1237
Référence: E14-RING-1
Marque: Rui Jun
E14 Lamp Holder Ring
E14 Lamp Holder Shade Ring / 35mm Diameter / Internal Diameter 26.5mm / Black / E14-RING-1.
0,17 £
Tax excl. - 0,17 £ Tax incl.
En stock:
1000
Référence: E14-RING-L-2
Marque: Rui Jun
E14 Lamp Holder Ring Large
Large Diameter E14 Lamp Holder Shade Ring / 44mm Diameter / Internal Diameter 26.5mm / White / E14-RING-L-2.
0,17 £
Tax excl. - 0,17 £ Tax incl.
En stock:
867
Référence: P-35-15
Marque: Rui Jun
10mm Steel Allthread 15mm Long
15mm long steel 10mm zinc plated hollow allthread for lamp holder assemblies and fittings. Suitable for use with our 10mm hex nuts and all lamp holders with 10mm openings.
0,13 £
Tax excl. - 0,13 £ Tax incl.
En stock:
0
Référence: P-27
Marque: Rui Jun
M10 Steel Hex Nut
Steel 10mm zinc plated hex nut for lamp holder assemblies and fittings. Suitable for use with our 10mm allthreads.
0,08 £
Tax excl. - 0,08 £ Tax incl.
En stock:
0
Référence: LINE-2-WH
Marque: Arditi Spa.
Interrupteur pour Luminaire Bipolaire - Blanc
A double pole 2 Amp inline switch in white with termination for live, neutral and earth cables. Both the live and neutral wires are switched for extra safety. The body of the inline switch screws together with two screws for simple fast assembly. Suitable for 3 core cables. Internally assembly is achieved using screw terminal blocks.
2,29 £
Tax excl. - 2,29 £ Tax incl.
En stock:
37
Référence: LINE-1-BK
Marque: Arditi Spa.
Interrupteur pour Luminaire Unipolaire - Noir
A single pole 2 Amp inline switch in black with termination for live, neutral and earth cables. The body screws together with two screws for simple fast assembly. Suitable for 2 core and 3 core cables. Internally assembly is achieved using screw terminal blocks.
1,41 £
Tax excl. - 1,41 £ Tax incl.
En stock:
151
Référence: P12-BLACK
Metal Cord Grip - Black
Metal strain relief cord grip with black finish for use with our E14 and E27 lamp holders and ceiling roses. Supplied with 10mm threaded bushing and nut.
1,65 £
Tax excl. - 1,65 £ Tax incl.
En stock:
278
Référence: E14-RING-L-1
Marque: Rui Jun
E14 Lamp Holder Ring Large
Large Diameter E14 Lamp Holder Shade Ring / 44mm Diameter / Internal Diameter 26.5mm / Black / E14-RING-L-1.
0,17 £
Tax excl. - 0,17 £ Tax incl.
En stock:
2143
Référence: 500-3PLENPA
Marque: Rui Jun
3 Way / Pole Screw Terminal Block with Live Earth Neutral Print
A 3 pole / 3 way screw terminal terminal block suitable for domestic lighting circuits. Suitable for wire sizes of 0.75mm to 2.5mm. Nylon 6/6 material. Printed with live earth and neutral for improved safety in wiring up lighting circuits. Carrying VDE, UL, SAA and CE approvals / certification. RoHS compliant.
0,75 £
Tax excl. - 0,75 £ Tax incl.
En stock:
2684
Référence: P12B
Marque: Rui Jun
Cord Grip Black
E27/E14 Cord Grip / Lampholder Pendant Converter / Black / P12B.
0,26 £
Tax excl. - 0,26 £ Tax incl.
En stock:
186
Référence: S21
Marque: Rui Jun
Pack of Screws and Rawl Plugs x 2
Pack of screws, washers and rawl plugs. Each pack contains 2 round head Phillips 25 x 4mm screws, 2 washers and 2 rawl plugs.
0,10 £
Tax excl. - 0,10 £ Tax incl.
En stock:
0
Référence: PINSU-TW
Porcelain Cable Holder for Cable Wall Support - Blanc
White ceramic cable support 19mm diameter and 25mm tall, designed to support wires along walls and ceilings. Best used with our twisted fabric braided cables but can also be used with our braided fabric flex or other cables.
0,70 £
Tax excl. - 0,70 £ Tax incl.
En stock:
228
Référence: P11-WHITE
Marque: Rui Jun
Cord Grip White
E27/E14 Cord Grip / Lampholder Pendant Converter / White / P11W.
0,26 £
Tax excl. - 0,26 £ Tax incl.
En stock:
1443
Référence: M10-ALL-25
Marque: Rui Jun
10mm Steel Allthread 25mm Long
25mm long steel 10mm zinc plated hollow allthread for lamp holder assemblies and fittings. Suitable for use with our 10mm hex nuts and all lamp holders with 10mm openings.
0,23 £
Tax excl. - 0,23 £ Tax incl.
En stock:
0
A single pole 2 Amp inline switch in white with termination for live, neutral and earth cables. The body screws together with two screws for simple fast assembly. Suitable for 2 core and 3 core cables. Internally assembly is achieved using screw terminal blocks.