1,32 £
Tax excl. - 1,32 £ Tax incl.
En stock:
0
- No hay más artículos en su carrito
- Transporte
- Total 0,00 £
- Interruptores
- Interruptores Basculante
- Pulsadores
- Interruptores Rotativo
- Pulsador Antivandálico Interruptores
- Teclado Antivandálico
- Micro Interruptores
- Interruptor Péndulo
- Interruptor Deslizan
- Interruptores de Palanca
- Timer Switches
- NVR Switches
- Emergency Stop Switches
- Float Switches
- Conector
- Conector IEC
- Conector IEC Desmontable
- Regletas
- Toma de Corriente Euro Module
- Enchufe de Energía del Reino Unido
- Auto Cigarrillos Enchufes
- Tomas de Corriente Continua
- Enchufes de Adaptador de Alimentación
- USB
- Cables de Alimentación
- Terminales Preaislados
- Waterproof Plugs, Sockets and Connectors
- Solar PV Connectors
- EV Cables
- Circular 12mm Connectors
- Circular 16mm Connectors
- Circular 20mm Power Connectors
- Binding Posts
- Circular Connectors - Range Overview
- GST Connectors
- Circular RJ45 Connectors - Waterproof
- USB Data Connectors - Waterproof
- Control de Temperatura
- Fusible, Portafusible
- Potenciómetro
- Filtro
- Baterías
- Iluminación
- Portalámpara
- Portalámpara Fluorescentes Compactas
- Portalámpara Cerámico
- Portalámpara Fluorescentes
- Portalámpara Edison
- Portalámpara E14
- Portalámpara E27
- Portalámparas Latón E27
- Portalámpara E27 Glosar
- Portalámpara G10Q
- Portalámpara Halógeno de Bajo Voltaje GX5.3, GY6.35, GU4 y GU5.3
- Portalámpara Accesorios
- Portalámpara GU10
- Portalámpara B22
- Portalámpara E27 con Toma de Tierra
- Portalámparas R7s
- Portalámparas G9
- Indicadores
- Bombillas
- Cables Textil
- Kit Portalámpara
- Ceiling Rose
- Inline Switches
- Dimmer Switches
- Low Voltage Lighting
- Portalámpara
- Piezo Buzzers
- Automotive & Marine
Referencia: R13-112A
Marca: SCI (Shin Chin)
Interruptor Basculante Redondo
Interruptor Basculante Redondo / 2 Posiciones y 1 Circuito (SPST) / On-Off / 10A 250V / Negro / O - Estampado / Mounting Tipo Panel, Corte Panel 20mm / Faston Terminales 4.8mm / Homologaciones VDE, UL / RoHS / R13-112A.
0,68 £
Tax excl. - 0,68 £ Tax incl.
En stock:
228
Referencia: 0707-1-CW1
Marca: Inalways
Conector IEC C14 Chasis Macho
Conector IEC C14 Chasis Macho / EN60320 C14 / 10A 250Vac / Orificio de Ajuste / 6.3mm Terminales / UL, VDE / RoHS / 0707-1-CW1.
0,75 £
Tax excl. - 0,75 £ Tax incl.
En stock:
4321
Referencia: R0904N-B10K1
Marca: Song-Huei
9mm 10K Ohm Linear Pot with White Line Indicator
Rotary Potentiometer with White Line Indicator / 9mm / Round Plastic Shaft 25mm Long & 6mm Diameter / Single Unit / Un-Switched / Vertical Terminal Orientation / No Bushing / PCB Terminals / 20% Tolerance / 10K Resistance / Linear Taper / RoHS / R0904N-B10K L-25KQ.
0,88 £
Tax excl. - 0,88 £ Tax incl.
En stock:
0
Referencia: K327E
Marca: Kang Rong
Portalámpara Cerámico E27
Portalámpara Cerámico / E27 (ES) / Blanco / M3 Orificio de Fijación / 4A 250Vac 2KV / T180 / VDE, RoHS / K327E.
0,99 £
Tax excl. - 0,99 £ Tax incl.
En stock:
1347
Single Pole In-Line Cord Switch - Oro
Valoración
A single pole 2 Amp inline switch in gold with termination for live, neutral and earth cables. The body screws together with two screws for simple fast assembly. Suitable for 2 core and 3 core cables. Internally assembly is achieved using screw terminal blocks.
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Descripción
Single pole inline switch in gold suitable for new lighting designs or refurbishment of table lamps. Can be used with either 2 core or 3 core cables. Made in Italy by Arditi and carrying ENEC and CE approvals. The switch should be installed on the live wire.
Dimensions - 60mm (L) x 15mm (H) x 26mm (W)
Reseñas
No hay reseñas de clientes en este momento.
16 otros productos en la misma categoría:
Referencia: KW-242
Marca: Kingway
Black Steel Ceiling Rose
Matt black powder coated ceiling rose. The ceiling rose is supplied with an external cord grip, strong steel mounting bracket with slots for easy fixing, pre-wired 3 pole terminal block as well as 2 screws, 2 rawl plugs and an additional "S" cable support. Dimensions are generous at 100mm diameter and 25mm deep.
4,12 £
Tax excl. - 4,12 £ Tax incl.
En stock:
719
Referencia: PINSU-TB
Porcelain Cable Support for Cable Wall Support - Black
Black ceramic cable support 19mm diameter and 25mm tall, designed to support wires along walls and ceilings. Best used with our twisted fabric braided cables but can also be used with our braided fabric flex or other cables.
0,70 £
Tax excl. - 0,70 £ Tax incl.
En stock:
73
Referencia: P13B
Marca: Rui Jun
10mm Cord Grip Black (Female)
10mm black cord grip with female internal thread and side grub screw.
0,33 £
Tax excl. - 0,33 £ Tax incl.
En stock:
0
Referencia: K540K
Marca: Kang Rong
20.8mm Arandela
20.8mm Arandela / Plástico / Blanco / K540K.
0,24 £
Tax excl. - 0,24 £ Tax incl.
En stock:
1193
Referencia: LINE-2-WH
Marca: Arditi Spa.
Double Pole Inline Cord Switch - White
A double pole 2 Amp inline switch in white with termination for live, neutral and earth cables. Both the live and neutral wires are switched for extra safety. The body of the inline switch screws together with two screws for simple fast assembly. Suitable for 3 core cables. Internally assembly is achieved using screw terminal blocks.
2,29 £
Tax excl. - 2,29 £ Tax incl.
En stock:
13
Referencia: M10-ALL-60
Marca: Rui Jun
10mm Steel Allthread 60mm Long
60mm long steel 10mm zinc plated hollow allthread for lamp holder assemblies and fittings. Suitable for use with our 10mm hex nuts and all lamp holders with 10mm openings.
0,49 £
Tax excl. - 0,49 £ Tax incl.
En stock:
1850
Referencia: RWQT039
Marca: Kang Rong
28mm Arandela
Lamp Holder Shade Ring / 31mm Outer Diameter (with Ledge 35mm) / Internal Diameter 28 x 2mm / Height 8.6mm / Zinc Alloy / For Use with K512P03 Lamp Holders and Others / RWQT039.
0,65 £
Tax excl. - 0,65 £ Tax incl.
En stock:
496
Referencia: P11C-007
Marca: Rui Jun
Cord Grip Clear
High quality clear plastic E27/E14 lamp holder cord grip. This is a plastic cord grip to provide strain relief when using a lamp holder as a pendant. Picture shows the cord grip being used with our gloss black porcelain lamp holder and our 3 core red fabric cable.
0,38 £
Tax excl. - 0,38 £ Tax incl.
En stock:
0
Referencia: P-27
Marca: Rui Jun
M10 Steel Hex Nut
Steel 10mm zinc plated hex nut for lamp holder assemblies and fittings. Suitable for use with our 10mm allthreads.
0,08 £
Tax excl. - 0,08 £ Tax incl.
En stock:
0
Referencia: P12-BRONZE
Metal Cord Grip - Bronze
Metal strain relief cord grip with Bronze finish for use with our E14 and E27 lamp holders and ceiling roses. Supplied with 10mm threaded bushing and nut.
1,65 £
Tax excl. - 1,65 £ Tax incl.
En stock:
496
Referencia: M10-ALL-20
Marca: Rui Jun
10mm Steel Allthread 20mm Long
20mm long steel 10mm zinc plated hollow allthread for lamp holder assemblies and fittings. Suitable for use with our 10mm hex nuts and all lamp holders with 10mm openings.
0,23 £
Tax excl. - 0,23 £ Tax incl.
En stock:
1755
Referencia: E27-H19
Marca: Rui Jun
Cable Isolator for E27 ES Lamp Holder Wiring
An E27 / ES lamp holder cable isolator. This can be used in the base of E27 lamp holders to strengthen and form an additional insulation barrier between the wires and any exposed metal parts such as all threads.
0,12 £
Tax excl. - 0,12 £ Tax incl.
En stock:
1237
Referencia: LINE-1-WH
Marca: Arditi Spa.
Single Pole In-Line Cord Switch - White
A single pole 2 Amp inline switch in white with termination for live, neutral and earth cables. The body screws together with two screws for simple fast assembly. Suitable for 2 core and 3 core cables. Internally assembly is achieved using screw terminal blocks.
1,41 £
Tax excl. - 1,41 £ Tax incl.
En stock:
77
Referencia: M10-ALL-35
Marca: Rui Jun
10mm Steel Allthread 35mm Long
35mm long steel 10mm zinc plated hollow allthread for lamp holder assemblies and fittings. Suitable for use with our 10mm hex nuts and all lamp holders with 10mm openings.
0,27 £
Tax excl. - 0,27 £ Tax incl.
En stock:
31
Referencia: P11-WHITE
Marca: Rui Jun
Cord Grip White
E27/E14 Cord Grip / Lampholder Pendant Converter / White / P11W.
0,26 £
Tax excl. - 0,26 £ Tax incl.
En stock:
668
Referencia: P12-GOLD
Metal Cord Grip - Gold
Metal strain relief cord grip with Gold finish for use with our E14 and E27 lamp holders and ceiling roses. Supplied with 10mm threaded bushing and nut.
1,65 £
Tax excl. - 1,65 £ Tax incl.
En stock:
497
A single pole 2 Amp inline switch in gold with termination for live, neutral and earth cables. The body screws together with two screws for simple fast assembly. Suitable for 2 core and 3 core cables. Internally assembly is achieved using screw terminal blocks.