1,32 £
Tax excl. - 1,32 £ Tax incl.
En stock:
2560
- No hay más artículos en su carrito
- Transporte
- Total 0,00 £
- Interruptores
- Interruptores Basculante
- Pulsadores
- Interruptores Rotativo
- Pulsador Antivandálico Interruptores
- Teclado Antivandálico
- Micro Interruptores
- Interruptor Péndulo
- Interruptor Deslizan
- Interruptores de Palanca
- Timer Switches
- NVR Switches
- Emergency Stop Switches
- Float Switches
- Conector
- Conector IEC
- Conector IEC Desmontable
- Regletas
- Toma de Corriente Euro Module
- Enchufe de Energía del Reino Unido
- Auto Cigarrillos Enchufes
- Tomas de Corriente Continua
- Enchufes de Adaptador de Alimentación
- USB
- Cables de Alimentación
- Terminales Preaislados
- Waterproof Plugs, Sockets and Connectors
- Solar PV Connectors
- EV Cables
- Circular 12mm Connectors
- Circular 16mm Connectors
- Circular 20mm Power Connectors
- Binding Posts
- Circular Connectors - Range Overview
- GST Connectors
- Circular RJ45 Connectors - Waterproof
- USB Data Connectors - Waterproof
- Control de Temperatura
- Fusible, Portafusible
- Potenciómetro
- Filtro
- Baterías
- Iluminación
- Portalámpara
- Portalámpara Fluorescentes Compactas
- Portalámpara Cerámico
- Portalámpara Fluorescentes
- Portalámpara Edison
- Portalámpara E14
- Portalámpara E27
- Portalámparas Latón E27
- Portalámpara E27 Glosar
- Portalámpara G10Q
- Portalámpara Halógeno de Bajo Voltaje GX5.3, GY6.35, GU4 y GU5.3
- Portalámpara Accesorios
- Portalámpara GU10
- Portalámpara B22
- Portalámpara E27 con Toma de Tierra
- Portalámparas R7s
- Portalámparas G9
- Indicadores
- Bombillas
- Cables Textil
- Kit Portalámpara
- Ceiling Rose
- Inline Switches
- Dimmer Switches
- Low Voltage Lighting
- Portalámpara
- Piezo Buzzers
- Automotive & Marine
Referencia: R13-112A
Marca: SCI (Shin Chin)
Interruptor Basculante Redondo
Interruptor Basculante Redondo / 2 Posiciones y 1 Circuito (SPST) / On-Off / 10A 250V / Negro / O - Estampado / Mounting Tipo Panel, Corte Panel 20mm / Faston Terminales 4.8mm / Homologaciones VDE, UL / RoHS / R13-112A.
0,68 £
Tax excl. - 0,68 £ Tax incl.
En stock:
18
Referencia: 0707-1-CW1
Marca: Inalways
Conector IEC C14 Chasis Macho
Conector IEC C14 Chasis Macho / EN60320 C14 / 10A 250Vac / Orificio de Ajuste / 6.3mm Terminales / UL, VDE / RoHS / 0707-1-CW1.
0,75 £
Tax excl. - 0,75 £ Tax incl.
En stock:
4320
Referencia: R0904N-B10K1
Marca: Song-Huei
9mm 10K Ohm Linear Pot with White Line Indicator
Rotary Potentiometer with White Line Indicator / 9mm / Round Plastic Shaft 25mm Long & 6mm Diameter / Single Unit / Un-Switched / Vertical Terminal Orientation / No Bushing / PCB Terminals / 20% Tolerance / 10K Resistance / Linear Taper / RoHS / R0904N-B10K L-25KQ.
0,88 £
Tax excl. - 0,88 £ Tax incl.
En stock:
0
Referencia: K327E
Marca: Kang Rong
Portalámpara Cerámico E27
Portalámpara Cerámico / E27 (ES) / Blanco / M3 Orificio de Fijación / 4A 250Vac 2KV / T180 / VDE, RoHS / K327E.
0,99 £
Tax excl. - 0,99 £ Tax incl.
En stock:
1075
35mm Arandela E14
Valoración
35mm Arandela E14 / Baquelita / Blanco / E14-RING-2.
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Descripción
This lamp shade ring can be used with most of our E14 lamp holders with threaded bases including ; E14-SD04-2, E14-SD03-2, K314C01 and K314B01. Dimension are ; 35mm outer diameter, 7.3mm height.
Reseñas
No hay reseñas de clientes en este momento.
16 otros productos en la misma categoría:
Referencia: LINE-1-GD
Marca: Arditi Spa.
Single Pole In-Line Cord Switch - Oro
A single pole 2 Amp inline switch in gold with termination for live, neutral and earth cables. The body screws together with two screws for simple fast assembly. Suitable for 2 core and 3 core cables. Internally assembly is achieved using screw terminal blocks.
1,57 £
Tax excl. - 1,57 £ Tax incl.
En stock:
0
Referencia: M10-ALL-20
Marca: Rui Jun
10mm Steel Allthread 20mm Long
20mm long steel 10mm zinc plated hollow allthread for lamp holder assemblies and fittings. Suitable for use with our 10mm hex nuts and all lamp holders with 10mm openings.
0,23 £
Tax excl. - 0,23 £ Tax incl.
En stock:
1755
Referencia: P11C-007
Marca: Rui Jun
Cord Grip Clear
High quality clear plastic E27/E14 lamp holder cord grip. This is a plastic cord grip to provide strain relief when using a lamp holder as a pendant. Picture shows the cord grip being used with our gloss black porcelain lamp holder and our 3 core red fabric cable.
0,38 £
Tax excl. - 0,38 £ Tax incl.
En stock:
0
Referencia: LINE-1-CL
Marca: Arditi Spa.
Single Pole In-Line Cord Switch - Transparent
A single pole 2 Amp inline switch in transparent with termination for live, neutral and earth cables. The body screws together with two screws for simple fast assembly. Suitable for 2 core and 3 core cables. Internally assembly is achieved using screw terminal blocks.
1,57 £
Tax excl. - 1,57 £ Tax incl.
En stock:
91
Referencia: 036827
Marca: Arditi Spa.
Inline Leading Edge Dimmer Switch - Black
A trailing edge dimmer switch for use with LED, CFL and Incandescent lamps. Suitable for 2 core cables only. Easy to assemble and connect with built in LED on the controller to enable you to find the switch in the dark. The built in memory will store the last used dimmer setting.
15,90 £
Tax excl. - 15,90 £ Tax incl.
En stock:
0
Referencia: P12-CHROME
Metal Cord Grip - Chrome
Metal strain relief cord grip with Chrome finish for use with our E14 and E27 lamp holders and ceiling roses. Supplied with 10mm threaded bushing and nut.
1,65 £
Tax excl. - 1,65 £ Tax incl.
En stock:
386
Referencia: TERM-3
Marca: Rui Jun
3 Way / Pole Screw Terminal Block
A 3 pole / 3 way screw terminal terminal block suitable for domestic lighting circuits. Suitable for wire sizes of 0.75mm to 2.5mm. Nylon 6/6 material. Carrying VDE and CE approvals / certification. RoHS compliant.
0,70 £
Tax excl. - 0,70 £ Tax incl.
En stock:
50
Referencia: S21
Marca: Rui Jun
Pack of Screws and Rawl Plugs x 2
Pack of screws, washers and rawl plugs. Each pack contains 2 round head Phillips 25 x 4mm screws, 2 washers and 2 rawl plugs.
0,10 £
Tax excl. - 0,10 £ Tax incl.
En stock:
0
Referencia: P-35-15
Marca: Rui Jun
10mm Steel Allthread 15mm Long
15mm long steel 10mm zinc plated hollow allthread for lamp holder assemblies and fittings. Suitable for use with our 10mm hex nuts and all lamp holders with 10mm openings.
0,13 £
Tax excl. - 0,13 £ Tax incl.
En stock:
0
Referencia: KW-242-A
Marca: Kingway
Black Steel Ceiling Rose - 3 Point
Create your own 3 drop pendant set with our linear 3 hole beautiful matt black ceiling rose. This ceiling rose is supplied with 3 external cord grips, strong steel mounting bracket with slots for easy fixing, upgraded 3 pole terminal block large enough for 3 wires, earth assembly as well as screws rawl plugs. Dimensions are generous at 100mm diameter and...
8,33 £
Tax excl. - 8,33 £ Tax incl.
En stock:
0
Referencia: K327-RING-1
Marca: Kang Rong
58mm Arandela E27 (K327)
58mm Arandela E27 / PET / Negro / ID 38mm / K327-RING-1.
0,17 £
Tax excl. - 0,17 £ Tax incl.
En stock:
788
Referencia: LINE-1-BK
Marca: Arditi Spa.
Single Pole In-Line Cord Switch - Black
A single pole 2 Amp inline switch in black with termination for live, neutral and earth cables. The body screws together with two screws for simple fast assembly. Suitable for 2 core and 3 core cables. Internally assembly is achieved using screw terminal blocks.
1,57 £
Tax excl. - 1,57 £ Tax incl.
En stock:
150
Referencia: DSHWM-105
Marca: Rui Jun
Cable Clamp - Nylon
Cable clamp for securing cables. Suitable for cables of around 4mm depending on cable type and fixing. Overall dimensions are 7.5mm x 24mm. Made from natural colour Nylon 6/6. RoHS compliant. DSHWM-105.
0,20 £
Tax excl. - 0,20 £ Tax incl.
En stock:
1745
Referencia: LINE-2-WH
Marca: Arditi Spa.
Double Pole Inline Cord Switch - White
A double pole 2 Amp inline switch in white with termination for live, neutral and earth cables. Both the live and neutral wires are switched for extra safety. The body of the inline switch screws together with two screws for simple fast assembly. Suitable for 3 core cables. Internally assembly is achieved using screw terminal blocks.
2,29 £
Tax excl. - 2,29 £ Tax incl.
En stock:
13
Referencia: 7051S
Marca: S. Lilley & Son Ltd
M10 Steel Hex Nut
Steel 10mm zinc plated hex nut for lamp holder assemblies and fittings. Suitable for use with our 10mm allthreads.
0,08 £
Tax excl. - 0,08 £ Tax incl.
En stock:
680
Referencia: TC-F22
Marca: HD Top
Lamp Support for 2G11 Lamps
Lamp support for 2G11 lamps made from UV stabilised polycarbonate. Snap in for 5.5mm holes with a lamp axis of 21mm.
0,20 £
Tax excl. - 0,20 £ Tax incl.
En stock:
3813
35mm Arandela E14 / Baquelita / Blanco / E14-RING-2.