1,32 £
Tax excl. - 1,32 £ Tax incl.
En stock:
0
- No hay más artículos en su carrito
- Transporte
- Total 0,00 £
- Interruptores
- Interruptores Basculante
- Pulsadores
- Interruptores Rotativo
- Pulsador Antivandálico Interruptores
- Teclado Antivandálico
- Micro Interruptores
- Interruptor Péndulo
- Interruptor Deslizan
- Interruptores de Palanca
- Timer Switches
- NVR Switches
- Emergency Stop Switches
- Float Switches
- Conector
- Conector IEC
- Conector IEC Desmontable
- Regletas
- Toma de Corriente Euro Module
- Enchufe de Energía del Reino Unido
- Auto Cigarrillos Enchufes
- Tomas de Corriente Continua
- Enchufes de Adaptador de Alimentación
- USB
- Cables de Alimentación
- Terminales Preaislados
- Waterproof Plugs, Sockets and Connectors
- Solar PV Connectors
- EV Cables
- Circular 12mm Connectors
- Circular 16mm Connectors
- Circular 20mm Power Connectors
- Binding Posts
- Circular Connectors - Range Overview
- GST Connectors
- Circular RJ45 Connectors - Waterproof
- USB Data Connectors - Waterproof
- Control de Temperatura
- Fusible, Portafusible
- Potenciómetro
- Filtro
- Baterías
- Iluminación
- Portalámpara
- Portalámpara Fluorescentes Compactas
- Portalámpara Cerámico
- Portalámpara Fluorescentes
- Portalámpara Edison
- Portalámpara E14
- Portalámpara E27
- Portalámparas Latón E27
- Portalámpara E27 Glosar
- Portalámpara G10Q
- Portalámpara Halógeno de Bajo Voltaje GX5.3, GY6.35, GU4 y GU5.3
- Portalámpara Accesorios
- Portalámpara GU10
- Portalámpara B22
- Portalámpara E27 con Toma de Tierra
- Portalámparas R7s
- Portalámparas G9
- Indicadores
- Bombillas
- Cables Textil
- Kit Portalámpara
- Ceiling Rose
- Inline Switches
- Dimmer Switches
- Low Voltage Lighting
- Portalámpara
- Piezo Buzzers
- Automotive & Marine
Referencia: R13-112A
Marca: SCI (Shin Chin)
Interruptor Basculante Redondo
Interruptor Basculante Redondo / 2 Posiciones y 1 Circuito (SPST) / On-Off / 10A 250V / Negro / O - Estampado / Mounting Tipo Panel, Corte Panel 20mm / Faston Terminales 4.8mm / Homologaciones VDE, UL / RoHS / R13-112A.
0,68 £
Tax excl. - 0,68 £ Tax incl.
En stock:
228
Referencia: 0707-1-CW1
Marca: Inalways
Conector IEC C14 Chasis Macho
Conector IEC C14 Chasis Macho / EN60320 C14 / 10A 250Vac / Orificio de Ajuste / 6.3mm Terminales / UL, VDE / RoHS / 0707-1-CW1.
0,75 £
Tax excl. - 0,75 £ Tax incl.
En stock:
4321
Referencia: R0904N-B10K1
Marca: Song-Huei
9mm 10K Ohm Linear Pot with White Line Indicator
Rotary Potentiometer with White Line Indicator / 9mm / Round Plastic Shaft 25mm Long & 6mm Diameter / Single Unit / Un-Switched / Vertical Terminal Orientation / No Bushing / PCB Terminals / 20% Tolerance / 10K Resistance / Linear Taper / RoHS / R0904N-B10K L-25KQ.
0,88 £
Tax excl. - 0,88 £ Tax incl.
En stock:
0
Referencia: K327E
Marca: Kang Rong
Portalámpara Cerámico E27
Portalámpara Cerámico / E27 (ES) / Blanco / M3 Orificio de Fijación / 4A 250Vac 2KV / T180 / VDE, RoHS / K327E.
0,99 £
Tax excl. - 0,99 £ Tax incl.
En stock:
1347
Cable Clamp - Nylon
Valoración
Cable clamp for securing cables. Suitable for cables of around 4mm depending on cable type and fixing. Overall dimensions are 7.5mm x 24mm. Made from natural colour Nylon 6/6. RoHS compliant. DSHWM-105.
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Reseñas
No hay reseñas de clientes en este momento.
16 otros productos en la misma categoría:
Referencia: PINSU-TW
Porcelain Cable Support for Cable Wall Support - White
White ceramic cable support 19mm diameter and 25mm tall, designed to support wires along walls and ceilings. Best used with our twisted fabric braided cables but can also be used with our braided fabric flex or other cables.
0,70 £
Tax excl. - 0,70 £ Tax incl.
En stock:
167
Referencia: LINE-1-WH
Marca: Arditi Spa.
Single Pole In-Line Cord Switch - White
A single pole 2 Amp inline switch in white with termination for live, neutral and earth cables. The body screws together with two screws for simple fast assembly. Suitable for 2 core and 3 core cables. Internally assembly is achieved using screw terminal blocks.
1,41 £
Tax excl. - 1,41 £ Tax incl.
En stock:
77
Referencia: M10-ALL-50
Marca: Rui Jun
10mm Steel Allthread 50mm Long
50mm long steel 10mm zinc plated hollow allthread for lamp holder assemblies and fittings. Suitable for use with our 10mm hex nuts and all lamp holders with 10mm openings.
0,42 £
Tax excl. - 0,42 £ Tax incl.
En stock:
1886
Referencia: P12W
Marca: Rui Jun
Cord Grip White
E27/E14 Cord Grip / Lampholder Pendant Converter / White / P12W.
0,26 £
Tax excl. - 0,26 £ Tax incl.
En stock:
3372
Referencia: GR-H9
Marca: Rui Jun
Tube Grommet 9mm for Use with All Threads
A tube grommet insulator for use with our hollow all threads. These are used in conjunction with all threads to form an additional insulation barrier between the wires and any the all threads.
0,12 £
Tax excl. - 0,12 £ Tax incl.
En stock:
1447
Referencia: PINSU-TB
Porcelain Cable Support for Cable Wall Support - Black
Black ceramic cable support 19mm diameter and 25mm tall, designed to support wires along walls and ceilings. Best used with our twisted fabric braided cables but can also be used with our braided fabric flex or other cables.
0,70 £
Tax excl. - 0,70 £ Tax incl.
En stock:
73
Referencia: 036827
Marca: Arditi Spa.
Inline Leading Edge Dimmer Switch - Black
A trailing edge dimmer switch for use with LED, CFL and Incandescent lamps. Suitable for 2 core cables only. Easy to assemble and connect with built in LED on the controller to enable you to find the switch in the dark. The built in memory will store the last used dimmer setting.
15,90 £
Tax excl. - 15,90 £ Tax incl.
En stock:
0
Referencia: LINE-1-GD
Marca: Arditi Spa.
Single Pole In-Line Cord Switch - Oro
A single pole 2 Amp inline switch in gold with termination for live, neutral and earth cables. The body screws together with two screws for simple fast assembly. Suitable for 2 core and 3 core cables. Internally assembly is achieved using screw terminal blocks.
1,41 £
Tax excl. - 1,41 £ Tax incl.
En stock:
19
Referencia: TC-F22
Marca: HD Top
Lamp Support for 2G11 Lamps
Lamp support for 2G11 lamps made from UV stabilised polycarbonate. Snap in for 5.5mm holes with a lamp axis of 21mm.
0,20 £
Tax excl. - 0,20 £ Tax incl.
En stock:
3813
Referencia: P11C-007
Marca: Rui Jun
Cord Grip Clear
High quality clear plastic E27/E14 lamp holder cord grip. This is a plastic cord grip to provide strain relief when using a lamp holder as a pendant. Picture shows the cord grip being used with our gloss black porcelain lamp holder and our 3 core red fabric cable.
0,38 £
Tax excl. - 0,38 £ Tax incl.
En stock:
0
Referencia: LINE-1-BK
Marca: Arditi Spa.
Single Pole In-Line Cord Switch - Black
A single pole 2 Amp inline switch in black with termination for live, neutral and earth cables. The body screws together with two screws for simple fast assembly. Suitable for 2 core and 3 core cables. Internally assembly is achieved using screw terminal blocks.
1,41 £
Tax excl. - 1,41 £ Tax incl.
En stock:
223
Referencia: 7051S
Marca: S. Lilley & Son Ltd
M10 Steel Hex Nut
Steel 10mm zinc plated hex nut for lamp holder assemblies and fittings. Suitable for use with our 10mm allthreads.
0,08 £
Tax excl. - 0,08 £ Tax incl.
En stock:
680
Referencia: P12-BRONZE
Metal Cord Grip - Bronze
Metal strain relief cord grip with Bronze finish for use with our E14 and E27 lamp holders and ceiling roses. Supplied with 10mm threaded bushing and nut.
1,65 £
Tax excl. - 1,65 £ Tax incl.
En stock:
496
Referencia: E14-RING-2
Marca: Rui Jun
35mm Arandela E14
35mm Arandela E14 / Baquelita / Blanco / E14-RING-2.
0,17 £
Tax excl. - 0,17 £ Tax incl.
En stock:
70
Referencia: LINE-1-CL
Marca: Arditi Spa.
Single Pole In-Line Cord Switch - Transparent
A single pole 2 Amp inline switch in transparent with termination for live, neutral and earth cables. The body screws together with two screws for simple fast assembly. Suitable for 2 core and 3 core cables. Internally assembly is achieved using screw terminal blocks.
1,57 £
Tax excl. - 1,57 £ Tax incl.
En stock:
91
Referencia: K513K-1
Marca: Kang Rong
Adaptador GU10 a E27
Adaptador GU10 a E27 / 2A 250V / T210 / CE / RoHS / K513K-1.
0,83 £
Tax excl. - 0,83 £ Tax incl.
En stock:
0
Cable clamp for securing cables. Suitable for cables of around 4mm depending on cable type and fixing. Overall dimensions are 7.5mm x 24mm. Made from natural colour Nylon 6/6. RoHS compliant. DSHWM-105.