Termostatos Bimetálicos NC 120ºC

KSD301M-120LA-R

Nuevo

Termostatos Bimetálicos / 1/2” / Reinicio Manual / 16A 250V / N/C / Tolerancia ±4.5 Grado C en Abierto y Manual en Cerrado / Soporte Suelto Tipo BT / 6.3mm Terminales Verticales / 120 Grado C Normal Cerrado Termostatos Bimetálicos / Circuito Abierto en Subida de Temperatura por Encima de 120 Grado C / Reajustar Manual / RoHS / Cuerpo De Cerámico / KSD301-12.0/16LA16R9.

Más detalles

10 artículos

£5.25 Ex VAT

£6.30   Tax incl.

Volume discounts

QuantityPriceYou Save
500 £2.98 Up to £1,135.05
100 £3.33 Up to £191.99
50 £3.69 Up to £77.99
25 £4.17 Up to £27.00

Data sheet

Termination6.3mm QC Terminals
Current Rating16A
Switching Cycles (16A 250V)10,000
Cap MaterialBrass
Body MaterialBakelite
Contact ResistanceLess Than 50 m Ohm
SeriesKSD301-R-G
Maximum Ambient Termperature205 Degrees C

More info

16 Amp 250Vac rated manual reset thermal cut out suitable for loads of around 3kw (maximum). Supplied with an M4 threaded shaft for fitting. This thermal cut out is normally closed (NC), meaning that it is normally in the on position. The thermal cut out will open (turn off) on reaching 120 degrees celsius and can be reset manually. This is a 1/2 inch thermal cut out, not to be confused with the higher rated 3/4 inch thermal cut outs more suitable for higher loads typically found in more powerful power showers. Supplied with 6.3mm vertical quick connect terminals and enclosed in a ceramic body. Carries TUV approval at 16A 250Vac & American UL approval at 16A 125Vac and complies with RoHS.

Prices

1-2425-4950-99100-499500 +
£5.25£4.17£3.69£3.33£2.98

Productos relacionados

Los clientes que compraron este producto también han comprado...