Thermal Cut Out 200ºC N/C



Bimetallic Switch (Thermal Cut Out) / Surface Mount / 1/2” / Auto Reset / 10A 250V / N/C / Tolerance ±5 Degrees C on Open and ±10 Degrees on Close / Loose Bracket Type BT / 6.3mm Horizontal Term / 200 Degrees C Normally Closed Thermal Switch / Circuit is Open on Temperature Rise at 200 Degrees C / Reset Temperature 180 Degrees / TUV & UL Approved / RoHS / Ceramic Body / KSD301-20.0/10BT15S20-G.

More details

574 in Stock

£1.25 Ex VAT

£1.50   Tax incl.

Quantity Discounts (see below for price breakdown)

QuantityPriceYou Save
600 £0.60 Up to £390.00
200 £0.67 Up to £116.00
50 £0.74 Up to £25.50
25 £0.97 Up to £7.00


Termination6.3mm QC Terminals
Current Rating10A
Switching Cycles (10A 250V)30,000
Cap MaterialAluminium
Body MaterialCeramic
Contact ResistanceLess Than 50 m Ohm
Maximum Ambient Termperature280 Degrees C
Fixing Hole Centres24mm

More Info

10 Amp 250Vac rated automatic reset thermal cut out suitable for loads of around 2.5kw (maximum). Supplied with a loose bracket that can be rotated for mounting. This thermal cut out is normally closed (NC), meaning that it is normally in the on position. The thermal cut out will open (turn off) on reaching 200 degrees celsius and reset on temperature drop to 180 degrees celsius. This is a 1/2 inch thermal cut out, not to be confused with the higher rated 3/4 inch thermal cut outs more suitable for higher loads typically found in more powerful power showers. Supplied with 6.3mm horizontal quick connect terminals and enclosed in a ceramic body. Carries TUV approval at 10A 250Vac & American UL approval at 16A 125Vac and complies with RoHS.


1-2425-4950-199200-599600 +


Related Products

Customers who bought this product also bought: