Thermal Cut Out 90ºC N/C

Part Number KSD301M-90ARBTC

Condition New

Bimetallic Switch (Thermal Cut Out) / Surface Mount / 1/2” / Manual Reset / 16A 250V / N/C / Tolerance ±3 Degrees C on Open and Manual on Close / Loose Bracket Type BT / 6.3mm Vertical Term / 90 Degrees C Normally Closed Thermal Switch / Circuit is Open on Temperature Rise at 90 Degrees C / Manual Reset / TUV & UL Approved / RoHS / Ceramic Body / KSD301-9.0/16BT16R9-G.

More details

367 Item in Stock

Quantity Discounts (see below for price breakdown)

Quantity	Price	You Save
500	£1.06	Up to £315.02
100	£1.18	Up to £51.00
50	£1.31	Up to £19.00
25	£1.48	Up to £5.25

Features

Termination	6.3mm QC Terminals
Current Rating	16A
Switching Cycles (16A 250V)	10,000
Cap Material	Aluminium
Body Material	Ceramic
Contact Resistance	Less Than 50 m Ohm
Series	KSD301-R-G
Maximum Ambient Temperature	185 Degrees C
Fixing Hole Centres	24mm

More Info

16 Amp 250Vac rated manual reset thermal cut out suitable for loads of around 3kw (maximum). Supplied with a loose bracket that can be rotated for mounting. This thermal cut out is normally closed (NC), meaning that it is normally in the on position. The thermal cut out will open (turn off) on reaching 90 degrees celsius and can be reset manually. This is a 1/2 inch thermal cut out, not to be confused with the higher rated 3/4 inch thermal cut outs more suitable for higher loads typically found in more powerful power showers. Supplied with 6.3mm vertical quick connect terminals and enclosed in a ceramic body. Carries TUV approval at 16A 250Vac & American UL approval at 16A 125Vac and complies with RoHS.